Cleaning Shovel/Brush

Exothermic welding supporting tools-mold cleaning shovel: used to crush slag when cleaning molds.

Exothermic welding supporting tools-steel brush, copper brush, hair brush: mainly used for cleaning the mold cavity.

Product Details

In addition to clamps, there are several other supporting tools that are commonly used in exothermic welding processes, including mold cleaning shovels and cleaning brushes. These tools help prepare the exothermic welding mold, remove debris, and ensure optimal conditions for a successful weld.

1. Mold Cleaning Shovel: A mold cleaning shovel is a specialized tool designed to remove any residual slag or molten metal from the exothermic welding mold. After the welding process, slag or excess metal may remain in the mold cavities. The cleaning shovel is used to carefully scrape and remove these residues, ensuring that the mold is clean and ready for the next welding operation. Mold cleaning shovels are typically made of non-conductive materials to prevent any electrical contact or interference.

1. Cleaning Brush: A cleaning brush is used in conjunction with the mold cleaning shovel to further clean the exothermic welding mold. The brush helps remove smaller particles, dust, or debris that may be left behind after using the cleaning shovel. The bristles of the brush are designed to be stiff enough to effectively dislodge and remove unwanted materials from the mold surfaces without causing damage. Cleaning brushes are available in various sizes and materials, depending on the specific application requirements.

1. Wire Brush: A wire brush is another type of cleaning tool that can be used for exothermic welding mold maintenance. Wire brushes are typically made with stiff bristles made of metal wires. They are useful for removing stubborn debris or rust that may accumulate on the mold surfaces over time. Wire brushes are effective in providing a thorough cleaning and preparing the mold for subsequent welding operations.

1. Compressed Air or Vacuum: Compressed air or vacuum systems can also be used as supporting tools for mold cleaning in exothermic welding. These systems help remove loose particles, dust, or debris from the mold surface. Compressed air can be used to blow away small particles, while a vacuum can be used to suction away loose debris. These tools are particularly useful for cleaning intricate or hard-to-reach areas of the mold.

1. Mold Release Agents: Mold release agents are substances applied to the exothermic welding mold to prevent the molten metal from sticking to the mold surfaces. These agents create a thin barrier between the mold and the weld material, allowing for easy removal of the completed weld and minimizing the risk of damage to the mold. Mold release agents can be in the form of sprays, powders, or liquids, and they should be applied according to the manufacturer's instructions.

Using these supporting tools, such as mold cleaning shovels, cleaning brushes, compressed air or vacuum systems, and mold release agents, helps maintain the cleanliness and integrity of the exothermic welding mold. These tools contribute to the overall efficiency and success of the exothermic welding process by ensuring that the mold is in optimal condition for producing high-quality welds.